Products

Vishwa offers to its customers a full range of ceramic frits Opaque, Transparent, Engobe, Matt, etc.

These products of different textures, glass or opecity are designed to meant the requirement of all kind of production processes both wall & floor tile. (Single firing, double firing, & gres porceline)

Vishwa offers its customers with all products manufactured by vishwa group, offers unique a advantage in terms of Quality, Competitiveness, Commercial & Technical Service.

Products by Vishwa (Range of Frits)

  • High Glossy transparent frit for wall tile
  • High Glossy Opaque frit for wall tile
  • Transparent & Opaque frit for Monoporosa
  • High glossy transparent frit for floor tile
  • Engobe frits for wall & floor tile (High & Low COE)
  • Titanium frit for water proof engobe
  • Frits & compound for GVT & PGVT

Vishwa Technicians offers their service to customers of any time so to enable than to make the most correct choice depending on production process & finished product category to be produced.

FRIT

Frits is an industrial product that is widely used on manufacturing of almost all types of ceramic tiles and glass articles. it is one of the key element for tiles manufacturing as it creates glass coating over the surface of tiles to make it durable and scratch resistant. It is produced from the raw materials like Silica, Feldspar, Borax and Calcium Carbonate, most of this are widely available mineral powders. These raw materials are blended and particular portion and melted in continuous heat process to form a glass from them. This glass form of frit into their melted form then quenched in water to form a raw frit granules. Afterwards this quenched granules supplied to tiles manufacturer.

High Glossy transparent frit for wall tile

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
TR 1 1050 - 1080 0.33 glossy Transparent frit good for combination with opaque frit
TRD9 1040 - 1080 0.342 glossy Transparent frit good for combination with opaque
TR 244 1050 -1075 0.335 glossy Transparent frit good for combination with opaque
TR 303 L 1030 - 1085 0.335 high gloss and good flatness frit for digital printing
TR 836 1040 -1075 0.325 high gloss and good flatness frit for digital printing
TR 4033 1050 -1075 0.33 glossy Transparent frit good for combination with opaque frit
DTR4 1040 - 1085 0.321 high gloss and good flatness frit for digital printing
TR -2010 1060 -1080 0.334 high gloss and good flatness frit for digital printing

High Glossy Opaque frit for wall tile

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
OP 4055 1050 -1075 0.345 good whiteness with moderate softning point for DFF
OP 906 1050 -1075 0.34 good whiteness & flatness with moderate softning point for DFF
OP 78 1050 -1075 0.32 good whiteness & flatness with,very good in combination of Transparent frit for digital printing
OP 100 1050 -1075 0.328 good whiteness & flatness with,very good in combination of Transparent frit for digital printing
OP 9009 1050 -1070 0.325 good whiteness & flatness with,very good in combination of Transparent frit for digital printing
OP 708 1040 -1080 0.33 good whiteness & flatness with,very good in combination of Transparent frit for digital printing
OP 6900 1050 -1090 0.327 high zirconia Opaque with good flatness frit good for digital print
OP 6909 1050 -1090 0.324 high zirconia Opaque with good flatness frit good for digital print
OP 528 1130 -1180 0.35 Specially used in GVT compound

Transparent & Opaque frit for Monoporosa

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
TR 503 1100-1135 0.34 Transperent frit for single firing
TR 504 1100 -1135 0.342 Transperent frit for single firing
OP 537 1110 -1135 0.32 Opaque frit with high gloss for Single firing
OP 541 1115 -1140 0.325 Monoporosa frit specially used in GVT compound

High glossy transparent frit for floor tile

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
TR 554 Q 1140 - 1170 0.328 Transparent frit for floor tiles
TR 5010 1140 - 1170 0.38 Glossy frit WITH HIGH ZINC for floor tiles
TR 5013 1110 -1160 0.315 frit specially used in GVT compound

Engobe frits for wall & floor tile (High & Low COE)

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
ENG 709 1050 -1090 0.434 white engobe for wall.
ENG 222 1050-1100 0.457 white engobe for wall.
ENG 888 1060 -1160 0.31 White engobe for wall and floor
ENG 5250 1050 1135 0.52 with high zircon super white engobe specially used in GVT compound

Titanium frit for water proof engobe

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
TE 003A 1050 -1090 0.37 Titanium super white frit for water proof engobe
TE 003D 1050 -1110 0.438 Titanium super white frit for water proof engobe
TE 003E 1050 -1150 0.475 Titanium super white frit for water proof engobe

Frits & compound for GVT & PGVT

FRIT CODE FIRING TEMP. RANGE THERAMAL EXPANSION AT 575 IN % DISCRIPTION
MATT 1103 1060 - 1160 0.345 High barium matt frit used in wall and GVT compound
MATT 1104 1130 -1185 0.48 matt frit used in GVT compound
MATT 1110 1050 -1100 0.3 matt frit used in wall compound
TR 5016 1150 -1200 0.352 high gloss with high zinc used in GVT copmuond
TR 5019 1150 -1200 0.348 high gloss with high zinc used in GVT copmuond